541-419-3203
Home / Central Oregon / Redmond

Metal Carports & Buildings in Redmond, Oregon

Redmond sits in the middle of Central Oregon, with in-town lots and plenty of rural ground just outside. We build steel carports, RV covers, garages and shops for both.

Carports & RV covers in Redmond

Open, flat high desert means wind as well as snow. A metal carport in Redmond keeps vehicles and equipment out of the sun, snow and dust. Single, double and triple wide carports all work; the right width depends on what you park and whether you need to open doors on both sides.

For a trailer, boat or motorhome, an RV cover is a taller, longer carport. Gables and a short side panel under the eave are common add-ons. It is still an open carport, not an enclosed building.

Metal garages & shops in Redmond

A metal garage or shop has the sides and ends closed in. Around Redmond that might be a detached garage, a shop for welding or woodworking, or storage on acreage toward Terrebonne or Powell Butte. You choose the roll-up doors, walk-in door and windows.

All our framing is 14 gauge steel as standard. The A-frame vertical roof is the usual pick here because it sheds snow and rain best.

Diagram comparing an open metal carport with an enclosed metal garage
Carport or RV cover = open. Garage or shop = sides and ends closed in.

Snow load & certified options

Snow load is set by your exact address and elevation, not by the town name. Ask your building department for the number your building needs, write it down, and tell us. Certified buildings come rated for 40, 50, 60 or 80 psf snow load.

New to certified buildings? Certified buildings made simple explains it in three steps.

Labeled diagram of metal carport parts: roof panels, bows, legs, base rail, knee braces, peak brace, gable end, side panel and anchors
The parts of a carport, so you know what the building department is asking about.

Delivery & install to Redmond

We deliver and install free in Redmond and the surrounding area. Have the site level within about 2 inches, clear of vehicles and debris, and call 811 before any digging. The site prep page has the full list and the typical concrete layout.

Financing

Financing is available. The down payment is 12% for certified buildings and 11% for non-certified buildings. Call and we'll go over the options.

Redmond FAQ

Who handles permits in Redmond?
Inside Redmond city limits, start with the City of Redmond. Outside city limits, including Terrebonne, start with Deschutes County Community Development. Our permit guide lists phone numbers and links.
What wind speed are buildings designed for in Redmond?
Redmond is in Deschutes County. See the wind speed in the permit box on this page, and confirm it with your building department, because a lot can sit in a more exposed spot.
How wide should my carport be?
Measure what you park and add room to open doors and walk around. Our carport size guide walks through it, or call and we will help you size it.

More help

Nearby: Carports in Bend · Carports in Prineville · All Central Oregon towns

Get a building for your Redmond property

Customer resources: Permit Guide · Certified Buildings · Site Prep · Colors · Central Oregon